How To Videos

Use these videos before you arrive to a job site or even while you are there! These how-to videos were designed and created by our Technical Support staff to provide you help when you need it most.

Please Note: These videos are for reference only. For final installation information, please consult the manual or contact Technical Support.

  1. IS Series – Networked System Programming Version 2.0

    Learn how to program IS Series IP Direct stations Firmware Version 2.0*.

    * Please Note – If you have not updated to Firmware Version 2.0, please follow the directions in Video 2 prior to continuing.

    Before beginning, download the document IS IP Network Requirements.

    Video 1 – Introduction
    Video 2 – Firmware Update
    Video 3 – Client Set-Up

     

    Video 4 – IS-SOFT Configuration
    Video 5 – Host Log In
    Video 6 – IP Unit Registration

     

    Video 7 – Registering Stations
    Video 8 – Advance Station Settings
    Video 9 – Video Settings, Time-Date, System Update
  2. IS Series – Local Hardwired System Programming

    Learn how to program the IS Series control units through step-by-step tutorial videos.

    Playlist – Local Hardwired System Programming Playlist

     

    Video 1 – Logging In / System Configuration
    Video 2 – Network Setting
    Video 3 – Registering Sound Source

     

    Video 4 – Area Registration
    Video 5 – Zone Registration
    Video 6 – Control Unit Composition

     

    Video 7 – Registering Stations
    Video 8 – Advance Station Settings
    Video 9 – Advanced Station Settings, Inputs / Outputs

     

    Video 10 – Zone Setting
    Video 11 – Time and Date Setting
    Video 12 – Registering Sound Sequence

     

    Video 13 – Registering Daily Chime Schedule
    Video 14 – Chime Schedule Setting
    Video 15 – Registering Daily Transfer Schedule

     

    Video 16 – Transfer Schedule Settings
    Video 17 – Timer Settings
    Video 18 – Updating the System
  3. GT Series Videos
     

    Video 1 – Programming Call Buttons Using the Handshake Method on Direct Select Panels
    Video 2 – Programming Apartment Numbers on Digital Entrance Panels
    Video 3 – Initialize Tenant Building Access Codes on Digital Entrance

     

    Video 4 – Changing Tenant Building Access Codes on Digital Entrance Panels
    Video 5 – Creating a Unique ID Code on Digital Entrance Panels
    Video 6 – Changing the Scroll Speed on Digital Entrance Panels

     

    Video 7 – Adjusting the Delay Times
  4. JF Series Videos
    Video 1 – Wiring Door Stations and Power Supply
    Video 2 – Setting the Time and Date Stamp
    Video 3 – Adding a 2nd Door Station and Setting Call Tones
  5. LEM-1DL Videos

    Learn how to wire the LEM-1DL

    LEM-1DL Playlist
    Video 1 – Introduction
    Video 2 – Boxed Set Wiring